Timber Decking Paint is a hard wearing non slip polyurethane one pack paint designed to seal & colour timber tanalised decking. Provides anti-slip properties for pedestrian traffic areas.
For all exterior wooden decking boards & staircases. Can be used for ribbed, grooved & especially smooth surfaces.
Simply the best non slip decking paint on the market.
We highly recommend cleaning paint brushes, paint rollers & spray equipment with our Industrial Brush Cleaner & Thinner available in 1 litre & 5 litres can sizes.
Absolutely! Painting tanalised wood not only makes your garden look great but also gives the timber an added layer of protection, which can only be a good thing. However, you do need to be careful when painting pressure treated timber.
You cannot paint freshly tanalised wood, since moisture in the timber will mean that the paint won’t stick properly. You’ll need to buy some pressure treated wood preservative and paint that on to seal the wood first. These preservatives do vary, so make sure to read the instructions. These instructions should tell you when it’s appropriate to paint on the preservative, how many coats you need, and how long you need to wait before applying paint.
Application
When applying our Timber Decking Non Slip Decking Paint to old decking & tanalised timber, it is highly recommended to firstly apply one coat of our Timber Decking & Balustrade Paint.
Please Note : Please thin 10-15% with our Industrial Thinner.
Once applied & allowed to dry, please apply unthinned our Timber Decking Non Slip Paint.
Brand | Trade Paints |
Application | Brush, Roller |
Drying Time | 2-4 Hours |
Overcoating Time | 12-16 Hours |
Coverage m² P/Litre | 13 |
Finish | Satin |
Size | 1, 2.5, 5 Litres |
Recommended Thinner | Industrial Thinners |
Thinners | 770 |
MPN | PT1782 |
By creating an account on our store you will be able to view your orders and gain loyalty points.
Remember 1000 points earned saves £50.00 at checkout! Our little way of saying ‘Thank you’.
Please complete the full form and then press submit at the bottom of the page to complete application.All fields marked with a * are required.