Timber Anti Slip Decking Paint

Heavy Duty Anti Slip Timber Decking Paint Overview

Timber Decking Paint is a hard wearing non slip polyurethane one pack paint designed to seal & colour timber tanalised decking. Provides anti-slip properties for pedestrian traffic areas.
For all exterior wooden decking boards & staircases. Can be used for ribbed, grooved & especially smooth surfaces.
Simply the best anti slip decking paint on the market.
 

• Micro-aggregates give increased grip
• Provides a slip-resistant surface in wet conditions

We highly recommend cleaning paint brushes, paint rollers & spray equipment with our Industrial Brush Cleaner & Thinner available in 1 litre & 5 litres can sizes.

Can I Paint Tanalised Wood?

Absolutely! Painting tanalised wood not only makes your garden look great but also gives the timber an added layer of protection, which can only be a good thing. However, you do need to be careful when painting pressure treated timber.

You cannot paint freshly tanalised wood, since moisture in the timber will mean that the paint wont stick properly. Youll need to buy some pressure treated wood preservative and paint that on to seal the wood first. These preservatives do vary, so make sure to read the instructions. These instructions should tell you when its appropriate to paint on the preservative, how many coats you need, and how long you need to wait before applying paint.

Application

When applying our Timber Decking Non Slip Decking Paint to old decking & tanalised timber, it is highly recommended to firstly apply one coat of our Timber Decking & Balustrade Paint.

Please Note : Please thin 10-15% with our Industrial Thinner.

Once applied & allowed to dry, please apply unthinned our Timber Decking Non Slip Paint.

Timber Decking Non Slip Paint Safety Data Sheet