Thermoguard Wallcoat Smoke & Flame Retardant Topcoat

Select Options
£45.83 ex VAT
You'll earn 54 loyalty points with this purchase
  Covid-19 Social Distance Safe Delivery

Thermoguard Wallcoat Smoke & Flame Retardant Topcoat Overview

Thermoguard Wallcoat Smoke & Flame Retardant Topcoat is a new generation of fire retardant topcoat and maintenance paint for walls and ceilings protected with Thermoguard Wallcoat Basecoat. As part of a complete system it controls surface spread of flame and fire propagation, total smoke control, flaming droplets and particulates to BS EN Class B s1 d0.
When used as instructed with Thermoguard Wallcoat, Thermoguard Wallcoat Smoke & Flame Retardant Topcoat completes a system that meets new Fire Regulations standard BS EN Class B s1 d0 and complies with British Standard Class 1 and Class 0 Surface Spread of Flame.  
Thermoguard Wallcoat Smoke and Flame Retardant Topcoat is a compatible, water-borne specialist finish that allow owners and operators of buildings to fulfil their Duty of Care for Fire Safety without having to compromise aesthetics by using it to finish the Wallcoat basecoat system.

To achieve BS EN Class B sl, d0, inspect and prepare in accordance with manufacturer’s instructions and apply -

  • 1 coat of Thermoguard Wallcoat
  • 1 coat of Thermoguard Wallcoat Smoke & Flame Retardant Matt or Eggshell Finish

Once your project is complete, use our simple online process to get your FREE Fire Certificate. Most of our customers need a Fire Certificate to show that the work has been done correctly and the correct product used.

These certificates are most often referred to as a “Fire Certificate” but in fact are really a certificate of supply. They indicate the amount of product supplied and the fire rating that this quantity of product would achieve over an agreed specified surface area/substrate. After your application is approved:   Thermoguard will  then supply the certificate Free of Charge by email. All that remains is for the contractor to confirm by signature that the product was applied correctly in accordance with the relevant instructions and data sheets.   There are many people who may need this certification: Building Managers, Insurance Companies, Building Control Departments etc. Thermoguard  quickly issue a certificate of supply that is universally recognised and accepted.

Not only is it easy to apply for the certificate, it also free of charge and normally supplied to you by email within five days.


Brand Thermoguard
Application Brush, Roller, Spray
Drying Time 2 Hours
Overcoating Time 6 Hours
Coverage m² P/Litre 8
Finish Matt
Size 80m² Packs
Recommended Thinner Water
MPN therm/wsfr/80/e
GTIN 5021887061026