Thermoguard Thermocoat WI Intumescent Fire Proof Steel Paint

 
Select Options
£53.99
£44.99 ex VAT
You'll earn 53 loyalty points with this purchase
  Covid-19 Social Distance Safe Delivery

Thermocoat WI Intumescent Steel Paint Overview

Thermoguard Thermocoat WI is a white water based interior intumescent paint system providing fire resistance to structural steel & cast iron of up to 90 mins with a minimum number of coats. A compatible decorative overcoat system ensures the system will enhance the building’s architectural & design features.

Thermoguard Thermocoat WI is optimised for Universal Beams, Columns and other open section steel:


Product performance assessment based upon UKAS/EGOLF Fire Test Laboratory Certification to BS 476 Part 21 - Fire resistance to load bearing elements of structures.

Specification

Apply Thermocoat to achieve fire resistance in accordance with the instructions provided by the technical department. When steel is visible or subject to variable or damp atmospheric conditions, apply 1-2 coats (dependant on specification) of Thermoguard Flame Retardant Eggshell Topcoat or Thermoguard Flame Retardant Gloss Topcoat.

Once your project is complete, use our simple online process to get your FREE Fire Certificate. Most of our customers need a Fire Certificate to show that the work has been done correctly and the correct product used.

These certificates are most often referred to as a “Fire Certificate” but in fact are really a certificate of supply. They indicate the amount of product supplied and the fire rating that this quantity of product would achieve over an agreed specified surface area/substrate. After your application is approved:   Thermoguard will  then supply the certificate Free of Charge by email. All that remains is for the contractor to confirm by signature that the product was applied correctly in accordance with the relevant instructions and data sheets.   There are many people who may need this certification: Building Managers, Insurance Companies, Building Control Departments etc. Thermoguard  quickly issue a certificate of supply that is universally recognised and accepted.

Not only is it easy to apply for the certificate, it also free of charge and normally supplied to you by email within five days.

APPLY FOR CERTIFICATE




 
Specification
Brand Thermoguard
Application Brush, Roller, Spray
Drying Time 2-4 Hours
Overcoating Time 4-10 Hours
Finish Matt
Size 2.5, 5, 20 Kg
Recommended Thinner Water
MPN THERM/WI/25
GTIN 0745178190008