Thermoguard Fire Varnish Interior Overcoat is a clear intumescent, fire retardant coating that is the second coat of a 2 coat system for the decorative Fire Protection of timber, wood & timber derivative substrates. Please see Thermoguard Fire Varnish Basecoat.
The systems special formula provides a tough, durable finish to internal panelling, cladding and trim.
The clear finish enhances the natural beauty of the substrate while fire protecting new and previously varnished surfaces. The protective Fire Varnish Overcoat provides protection against UV and wear, while offering a choice of sheen levels.
Thermoguard Fire Varnish achieves Class 1, Class O, EN Class B and can also achieve 30 minutes and 60 minutes Fire Resistance and provides Low Smoke Emission.
Tested to :
BS 476 Parts 7; Class 1 surface spread of flame.
BS 476 Part 6; Achieved Fire propagation.
System is designated Class O in accordance with UK Building Regulations
European EN Class B
Once your project is complete, use our simple online process to get your FREE Fire Certificate. Most of our customers need a Fire Certificate to show that the work has been done correctly and the correct product used.
These certificates are most often referred to as a Fire Certificate but in fact are really a certificate of supply. They indicate the amount of product supplied and the fire rating that this quantity of product would achieve over an agreed specified surface area/substrate. After your application is approved: Thermoguard will then supply the certificate Free of Charge by email. All that remains is for the contractor to confirm by signature that the product was applied correctly in accordance with the relevant instructions and data sheets. There are many people who may need this certification: Building Managers, Insurance Companies, Building Control Departments etc. Thermoguard quickly issue a certificate of supply that is universally recognised and accepted.
Not only is it easy to apply for the certificate, it also free of charge and normally supplied to you by email within five days.
Brand | Thermoguard |
Application | Brush, Roller, Spray |
Drying Time | 8 Hours |
Overcoating Time | 24 Hours |
Finish | Matt, Satin, Gloss |
Size | 20m² Pack |
Recommended Thinner | Water |
MPN | PT1986 |
SKU | PT1986 |
By creating an account on our store you will be able to view your orders and gain loyalty points.
Remember 1000 points earned saves £50.00 at checkout! Our little way of saying ‘Thank you’.
Please complete the full form and then press submit at the bottom of the page to complete application.All fields marked with a * are required.
Enter IC5 at checkout to receive 5% off your entire order online. Subject to Terms and Conditions.
NEVER miss out on our latest products & biggest deals. Sign up to our free monthly newsletter today!