Renotub is a durable two-part modified acrylic isocyanate free coating specially formulated & designed to provide excellent adhesion, durability & colour retention in high moisture areas.
It is ideal for use to renew cast iron, steel, enamel, ceramic porcelain, fiberglass, bath tubs, toilets, bidets & sinks. It is not for use on galvanized steel or flexible plastic.
Do not use on areas exposed to extreme heat such as stovetops, or constant high humidity environments. Do not use in continuous water immersion such as swimming pools, hot tubs, ponds, or saunas.
Because of its special properties Renotub is undoubtedly one of the best resurfacing and tile painting products on the market. Ideal for brush & roller application.
With Renotub you can transform your entire bathroom suite for relatively little expense and time!
Renotub's proven formula works on worn, discoloured or badly stained surfaces saving you hundreds of pounds on the cost of replacement.
Renotub has a glossy finish & good gloss retention.
1:1 mixing ratio for easy use & reduced wastage. Specially designed for application with brush & roller.
Each pack contains a 250ml of Part A coating in Brilliant White Ral 9016 & 250ml Part B of an Activator / Hardener.
Before applying carefully read the instructions on the container and use according to the manufacturers recommendations.
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.
Clean the surface in preparation for sanding.
Thoroughly abrade the surface with a suitable P600 abrasive sandpaper. Remove loose paint & rust with a wire brush.
To ensure a clean tidy finish round the edges & the fittings, we recommend applying masking tape to areas that do not require resurfacing and renovating.
Apply at temperatures between 10-25°C in a well ventilated room.
Before painting mix components A and B and stir thoroughly. Once mixed apply within 2 hours.
Use a fine quality, fine bristle brush. Brush in one direction only for a smooth surface and feather the edges as you paint to avoid a hard line between painted areas. Avoid excessive brushing to ensure an even coat & smooth finish. Brush around the edges & the fittings & when complete we recommend applying the surface with a good quality 4 foam roller.
Allow to dry 7 days before exposing to water.
|Application||Brush, Roller, Spray|
|Drying Time||2 Hours|
|Overcoating Time||4 Hours Minimum|
|Curing Time||7 Days|
|Pot Life||4 Hours|
|Coverage m² P/500ml||8|
|Recommended Thinner||Renotub Brush Cleaner & Thinner|
|Recommeded Cleaner||Renotub Brush Cleaner & Thinner|
Honestly a great product but loses a star due to its difficulty to apply.
Orestes Karatzas | | May 2022
Renotub is a difficult paint to use. Really important to prepare and sand bath as directed on the tin. Also temperature is very important, cast iron takes a lot longer to heat up then room temperature. In my experience the paint worked better when the bath was 15 + degrees. I did need to purchase a second lot of renotub to completely cover the bath (this might have been because when I applied the first coast the bath was too cold). I did leave the bath for 7 days after applying the first lot of renotub then re-sanded and applied the second lot of paint. Very pleased with the results after the second application.
S Acres | Devon | February 2022
By creating an account on our store you will be able to view your orders and gain loyalty points.
Remember 1000 points earned saves £50.00 at checkout! Our little way of saying ‘Thank you’.
Please complete the full form and then press submit at the bottom of the page to complete application.All fields marked with a * are required.