Free Technical Advice
  UK Express Delivery
100's Of Colours
Secure Checkout

Envirograf Fire Retardant Coatings For Doors

 
Select Options
£97.99
£81.66 ex VAT
You'll earn 97 loyalty points with this purchase

Do you need help?
Call our dedicated support team on
0845 838 2225

Envirograf Coating Kits for the Restoration of Doors Overview

Envirograf Fire Retardant Coatings For Doors is a water based kit for upgrading raised & fielded doors to fire door status. 
Each kit contains 500ml of primer, 500ml of intumescent coating & 500ml of top coat. Enough to cover an area of 6m² (depending on the size of the door this may be enough material to cover three to four sides of a door.), for up to 30-60 minutes of fire protection.

Up to 30 minute protection

Raised & Fielded Doors

Doors must have stiles and rails from 30mm to 40mm thick, with panels no less than 6 mm thick on the fielded area.

Ledged & Braced, or Braced T&G Doors

The T & G boards must have a minimum thickness of 23mm and the braced area must have a minimum thickness of 25mm.

Up to 60 Minutes Protection

Raised & Fielded Doors

Doors must have stiles and rails at a minimum of 44mm thick, with panels no less than 12-14mm thick on the fielded area.

Ledged & Braced, or Braced T&G Doors

The T & G boards must have a minimum thickness of 30mm and the braced area must have a minimum thickness of 35mm.

Application

Each kit has sufficient materials to cover an area of 6 m² or 3-4 single sides of doors, according to the size of the door. Use approximately ½ litre of Intumescent coating on each side of the door. Ensure that the whole face side of a raised & fielded door or ledged & braced T & G door is treated. If the door opens on to an escape corridor then you must treat the whole face on both sides of the door.

Varnished Doors - Existing or New

  • 1 coat ES/RFC Clear Adhesion Primer @ 10-12m² per litre
  • 2 coats ES/RFC Clear Intumescent Coating @ 8-10m² per litre, per coat
  • 1 coat ES/RFC Clear Top Coat @ 12m² per litre (Matt, Satin, Gloss)

Painted Doors - Existing or New

  • 1 coat ES/RFC Clear Adhesion Primer @ 10-12m² per litre
  • 2 coats ES/RFC White Intumescent Coating @ 10m² per litre, per coat
  • 1 coat ES/RFC Top Coat @ 12m² per litre (Matt, Satin, Gloss)

Treatment labels are supplied to be fitted to the door spine to declare to Building Control / Fire Officers that upgrade treatment has been performed.

Specification
Brand Envirograf
Application Brush, Roller
Coverage m² 6
Finish Matt, Satin, Gloss
Recommended Cleaner Water
MPN ES/RFC/M