Free Technical Advice
  UK Express Delivery
100's Of Colours
Secure Checkout

Coo-Var Dampshield

 
Select Options
£122.99
£102.49 ex VAT
You'll earn 122 loyalty points with this purchase

Do you need help?
Call our dedicated support team on
0845 838 2225

Coo-Var Dampshield Paint Overview

Coo-Var Dampshield is a two-component epoxy resin membrane that is tolerant of residual moisture in concrete floors. This enables earlier access onto the floor than would otherwise be available for the application of screeds, coatings and other floor coverings including carpets, tiles, vinyl and wood.

Coo-Var Dampshield can be used on concrete floors and fine concrete screeds, of not less than 50mm thick, in the case of unbonded screeds. The surface must be of sufficient quality, continuity and mechanical strength to ensure even coating.

Coo-Var Dampshield may also be applied to polymers, screeds and certain types of smoothing underlayment's, provided these are well bonded. Such under-layments must be stable to the effects of water. If not the concrete floor must contain an integral damp-proof membrane to prevent further ingress of water from the ground.

Where laid onto a concrete surface where there is no DPM or where damage may have rendered the DPM ineffective due consideration must be given to the possible presence of hydrostatic pressure, and the consequences of creating a barrier layer resulting in the pressure /water flow being directed elsewhere.

• Enables resin finishes etc. to be applied onto new concrete much sooner than the normal time required for concrete to dry.
• Easily applied by brush, roller or trowel edge.
• Can be applied onto substrates with hygrometer readings up to 97% RH. 
• Completely solvent free and low odour.

 
Specification
Brand Coo-Var
Application Roller
Drying Time 2 Hours
Overcoating Time 12 Hours Min
Pot Life 30 Mins
Finish Gloss
Size 5Kg
MPN coo/damp
GTIN 5021887016200